|
|
|
|
 Gen1 Montero Engine Swap
#1102352
10/27/16 05:56 AM
|
Joined: Oct 2016
Posts: 1
OP
Need a Spot
|
Hey everyone! New to the forum seems like a really helpful place. My Gen1 has 6G72 3.0, and it's toast. What engines bolt up to the auto transmission? Diamante 3.0 DOHC? I'm fine with the power I get out of the SOHC but I can get the DOHC for pretty cheap. What engines bolt up? Will I need a donor wiring harness and ECU?
|
|
 Re: Gen1 Montero Engine Swap
[Re: Mjopdycke]
#1102360
10/29/16 06:25 PM
|
Joined: Feb 2005
Posts: 7,458
Trail Leader
|
One reason that you've had no responses is that you posted in the Archive. Several of the questions you inquire about have been posed numerous times and it'll be worth your while to search through this archive. The Diamonte is front wheel drive, not rear. There are many examples of the 6G74 from the Stealth or 3000GT being used.
1987 Raider - Roxy
1988 Mighty Max 2.6L Turbo - Pearl
1997 Mountaineer V8 - Freddy
2000 Excursion V10 - Freya
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5862 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-05-25 07:34:12 UTCValid HTML 5 and Valid CSS 
