Gen 2 seats in a Gen 1

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen 2 seats in a Gen 1 [Re: Mudraider] #1102542 12/05/16 03:22 AM

Joined: Dec 2007

Posts: 2,348

Orange Park, FL

Mudraider

Body Damage is Cool

With the cover off, you will have access to the bolts hold the seat base to the seat adjuster. I highly recommend taking them out, and using them to be new bolts holding the seat base down in your gen 1. Same fine thread, except they are really clean, and I found I was able to thread them in by hand, as opposed to the ones that were originally in there.

Entire Thread
Subject	Posted By	Posted
Gen 2 seats in a Gen 1	Mudraider	12/05/16 03:04 AM
Re: Gen 2 seats in a Gen 1	Mudraider	12/05/16 03:11 AM
Re: Gen 2 seats in a Gen 1	Mudraider	12/05/16 03:22 AM
Re: Gen 2 seats in a Gen 1	Mudraider	12/05/16 03:32 AM
Re: Gen 2 seats in a Gen 1	Mudraider	12/05/16 03:41 AM
Re: Gen 2 seats in a Gen 1	fhuzz	12/05/16 04:04 PM
Re: Gen 2 seats in a Gen 1	Mudraider	12/07/16 05:26 PM
Re: Gen 2 seats in a Gen 1	poormansporsche	12/08/16 02:22 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.363s Queries: 16 (3.361s) Memory: 0.6073 MB (Peak: 0.6402 MB) Data Comp: Off Server Time: 2026-05-28 04:24:52 UTC
Valid HTML 5 and Valid CSS