Gen 2 seats in a Gen 1

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen 2 seats in a Gen 1 [Re: Mudraider] #1102543 12/05/16 03:32 AM

Joined: Dec 2007

Posts: 2,348

Orange Park, FL

Mudraider

Body Damage is Cool

You disassemble your Gen 1 seat the same way, separating the seat base from the seat adjuster. Then take the adjuster off your crusty old Gen 1 seat. Once off, toss that crappy, uncomfortable old seat. Take your Gen 1 adjuster, and bolt it in the front bolt hole on your Gen 2 seat. Like so;

Entire Thread
Subject	Posted By	Posted
Gen 2 seats in a Gen 1	Mudraider	12/05/16 03:04 AM
Re: Gen 2 seats in a Gen 1	Mudraider	12/05/16 03:11 AM
Re: Gen 2 seats in a Gen 1	Mudraider	12/05/16 03:22 AM
Re: Gen 2 seats in a Gen 1	Mudraider	12/05/16 03:32 AM
Re: Gen 2 seats in a Gen 1	Mudraider	12/05/16 03:41 AM
Re: Gen 2 seats in a Gen 1	fhuzz	12/05/16 04:04 PM
Re: Gen 2 seats in a Gen 1	Mudraider	12/07/16 05:26 PM
Re: Gen 2 seats in a Gen 1	poormansporsche	12/08/16 02:22 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.394s Queries: 16 (3.392s) Memory: 0.6070 MB (Peak: 0.6400 MB) Data Comp: Off Server Time: 2026-05-27 18:52:47 UTC
Valid HTML 5 and Valid CSS