4G64 6 bolt wideblock with DOHC 4G63 head thread?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

4G64 6 bolt wideblock with DOHC 4G63 head thread? #1102779 01/13/17 03:56 AM

Joined: Jul 2012

Posts: 69

Bloomington,IN,USA

ENG1N33R

Getting the Wheeling Fever

Just curious if anyone has a thread on the subject of building a 4G64 block/4G63 cylinder head rwd setup in a Gen 1 mated to a (5 speed manual KM145)
Theres threads everywhere but only pieces. Every link I can find to a complete thread on the subject of building the engine alone is a dead end.

Her Name was Eileen, Because she most often was on a jack...

Entire Thread
Subject	Posted By	Posted
4G64 6 bolt wideblock with DOHC 4G63 head thread?	ENG1N33R	01/13/17 03:56 AM
Re: 4G64 6 bolt wideblock with DOHC 4G63 head thread?	Mudraider	01/17/17 02:01 PM
Re: 4G64 6 bolt wideblock with DOHC 4G63 head thread?	Mudraider	01/17/17 02:07 PM
Re: 4G64 6 bolt wideblock with DOHC 4G63 head thread?	ENG1N33R	01/17/17 03:19 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.985s Queries: 15 (3.983s) Memory: 0.5974 MB (Peak: 0.6304 MB) Data Comp: Off Server Time: 2026-07-14 19:30:23 UTC
Valid HTML 5 and Valid CSS