90 model LWB trailing arms

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

90 model LWB trailing arms #1104137 01/27/18 02:18 PM

Joined: Jun 2015

Posts: 12

Tennessee

gen1v6raider Offline

Need a Spot

Anyone ever replace the bushings in the rear trailing arms on a gen1? Ordered a nolathane bush kit from Austrailia to upgrade from oem. Doesn't look too difficult but just wondered if there were any "surprises" i should look for? Thanks

Entire Thread
Subject	Posted By	Posted
90 model LWB trailing arms	gen1v6raider	01/27/18 02:18 PM
Re: 90 model LWB trailing arms	rxinhed	01/27/18 08:18 PM
Re: 90 model LWB trailing arms	gen1v6raider	01/31/18 10:56 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.563s Queries: 15 (3.399s) Memory: 0.5965 MB (Peak: 0.6295 MB) Data Comp: Off Server Time: 2026-05-28 08:03:58 UTC
Valid HTML 5 and Valid CSS