90 model LWB trailing arms

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 90 model LWB trailing arms [Re: gen1v6raider] #1104138 01/27/18 08:18 PM

Joined: Feb 2005

Posts: 7,458

Montero Ranch

rxinhed

Trail Leader

The rear bushings have long been a fairly straight forward replacement.

1. The two bushing shells on the leading end just slip off.
2. The rear end bushings can normally be pressed out.

[Linked Image]

1987 Raider - Roxy
1988 Mighty Max 2.6L Turbo - Pearl
1997 Mountaineer V8 - Freddy
2000 Excursion V10 - Freya

Entire Thread
Subject	Posted By	Posted
90 model LWB trailing arms	gen1v6raider	01/27/18 02:18 PM
Re: 90 model LWB trailing arms	rxinhed	01/27/18 08:18 PM
Re: 90 model LWB trailing arms	gen1v6raider	01/31/18 10:56 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.372s Queries: 16 (3.370s) Memory: 0.5976 MB (Peak: 0.6306 MB) Data Comp: Off Server Time: 2026-05-28 05:45:43 UTC
Valid HTML 5 and Valid CSS