Rear transfer case seal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear transfer case seal [Re: 87Raider] #1104393 06/10/18 05:30 PM

Joined: May 2009

Posts: 56

Las Vegas NV

87Raider

Getting the Wheeling Fever

Well, there's some play in it but it's hard to tell if it's the output shaft or the yoke. Also the bolts were lose on the shifter and it always had issues with going into 2nd gear, if you pulled it towards you when shifting it kinda went into nowhere. You had to pull it straight back into 2nd. Now that's it all tightened up it seems to hang up in 4th. Trany has about 40k since rebuild.

Entire Thread
Subject	Posted By	Posted
Rear transfer case seal	87Raider	06/09/18 05:30 PM
Re: Rear transfer case seal	rxinhed	06/09/18 06:23 PM
Re: Rear transfer case seal	87Raider	06/09/18 09:41 PM
Re: Rear transfer case seal	rxinhed	06/10/18 06:08 AM
Re: Rear transfer case seal	87Raider	06/10/18 05:30 PM
Re: Rear transfer case seal	87Raider	06/11/18 12:17 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.496s Queries: 16 (3.493s) Memory: 0.6007 MB (Peak: 0.6337 MB) Data Comp: Off Server Time: 2026-06-10 13:43:50 UTC
Valid HTML 5 and Valid CSS