1989 GEN 1 3.0L Oil Pressure

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1989 GEN 1 3.0L Oil Pressure [Re: chadzeilenga] #1104434 06/28/18 11:46 AM

Joined: Apr 2018

Posts: 108

Charlotte, NC USA

chadzeilenga Offline

Wheeler

Thanks Toasty, would you recommend removing the current oil pressure switch and installing a mechanical gauge to that port to test?

Entire Thread
Subject	Posted By	Posted
1989 GEN 1 3.0L Oil Pressure	chadzeilenga	06/25/18 03:06 AM
Re: 1989 GEN 1 3.0L Oil Pressure	TOASTY	06/25/18 11:44 PM
Re: 1989 GEN 1 3.0L Oil Pressure	chadzeilenga	06/28/18 11:46 AM
Re: 1989 GEN 1 3.0L Oil Pressure	DRLExpress	06/29/18 03:12 PM
Re: 1989 GEN 1 3.0L Oil Pressure	chadzeilenga	07/04/18 05:35 AM
Re: 1989 GEN 1 3.0L Oil Pressure	DRLExpress	07/04/18 05:58 AM
Re: 1989 GEN 1 3.0L Oil Pressure	DRLExpress	07/04/18 05:59 AM
Re: 1989 GEN 1 3.0L Oil Pressure	DRLExpress	07/05/18 08:41 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.711s Queries: 16 (3.709s) Memory: 0.6063 MB (Peak: 0.6393 MB) Data Comp: Off Server Time: 2026-06-07 02:41:42 UTC
Valid HTML 5 and Valid CSS