Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
ISO Gen II SR rear locker #1104505 08/06/18 02:38 AM
Joined: Feb 2016
Posts: 8
O
OConnor Offline OP
Need a Spot
I have a 91 LWB Gen I, time to upgrade, looking for Gen II SR with 4.63 rar end, locker (entire assembly), with trailing arms. Also the entire front brake setup.

I am in Virginia.

Thanks,

oconnorb55@gmail.com

Re: ISO Gen II SR rear locker [Re: OConnor] #1104506 08/07/18 09:57 PM
Joined: May 2012
Posts: 684
Oso Offline
Rock Warrior
*****
RAy Sala isnÔÇÖt scrapping an SR. Probably has everything you need. Should be able to find him on FB if he doesnÔÇÖt respond on here. Given that the locker diaphragm is obsolete combined with the shipping cost, you might consider an ARB. Install it in your gen 1 3rd member and youÔÇÖre done. If youÔÇÖre looking for gen 2 rear disc brakes you can use the LS rear end with your 3rd member. Both are 10 bolt. I did exactly this.


90 LWB - Not your average bear

"You are what you are, and you ain't what you ain't." - John Prine







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 4.667s Queries: 15 (0.006s) Memory: 0.5871 MB (Peak: 0.6352 MB) Data Comp: Off Server Time: 2026-07-13 14:26:24 UTC
Valid HTML 5 and Valid CSS