Timing chain maintenance?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Timing chain maintenance? [Re: rxinhed] #1104614 10/13/18 07:57 PM

Joined: Nov 2013

Posts: 94

Oregon

GrantCee

Getting the Wheeling Fever

Nope, no rattle at start or any other time. Oil Pressure is good.

If it's not something that needs doing right now, I'll add it to next summer's project list.

Do the chains for the balancer shafts get replaced at the same time?

1987 Montero SWB, 2.6L, 5spd
Weber conversion
2-valve head from Engine Machine Service
"4G54 FTW!"

Entire Thread
Subject	Posted By	Posted
Timing chain maintenance?	GrantCee	10/10/18 07:12 PM
Re: Timing chain maintenance?	ChrisLet	10/11/18 05:11 PM
Re: Timing chain maintenance?	rxinhed	10/13/18 03:14 AM
Re: Timing chain maintenance?	GrantCee	10/13/18 07:57 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.493s Queries: 16 (3.491s) Memory: 0.5985 MB (Peak: 0.6315 MB) Data Comp: Off Server Time: 2026-07-15 04:53:50 UTC
Valid HTML 5 and Valid CSS