Gen1 V6 Starter won't engage

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen1 V6 Starter won't engage [Re: Dirk_Pitt] #1104910 03/13/19 12:23 AM

Joined: Apr 2018

Posts: 108

Charlotte, NC USA

chadzeilenga Offline

Wheeler

Hi,
IÔÇÖve had similar with my Gen 1, but moving the shifter around resolved. I believe I need to clean the neutral safety switch.

Entire Thread
Subject	Posted By	Posted
Gen1 V6 Starter won't engage	Dirk_Pitt	03/12/19 08:49 PM
Re: Gen1 V6 Starter won't engage	chadzeilenga	03/13/19 12:23 AM
Re: Gen1 V6 Starter won't engage	rxinhed	03/24/19 03:19 AM
Re: Gen1 V6 Starter won't engage	Bigshankhank	04/04/19 12:43 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.366s Queries: 16 (3.364s) Memory: 0.5977 MB (Peak: 0.6307 MB) Data Comp: Off Server Time: 2026-05-26 18:25:12 UTC
Valid HTML 5 and Valid CSS