|
|
|
|
 Oil Cooler braided hoses
#1104935
04/01/19 03:31 AM
|
Joined: May 2006
Posts: 59
OP
Getting the Wheeling Fever
|
My 95 SR is leaking oil through the braided hoses than run to and from the oil cooler... MB890981 - pressure hose MB890983 - Oil Cooler Hose -- LISTED AS DISCONTINUED & UNAVAILABLE First - Are these the same hoses? And is there an alternative for either? And what about connections/fittings etc... Is it typical to reuse those when replacing these hoses or do I need to look at getting those as well. Here's a link to the parts site and diagram: https://www.mitsubishipartswarehous...ooling-system-cat/engine-oil-cooler-scatMany Thanks Guys.
89 Raider V6
95 SR Montero
|
|
|
Re: Oil Cooler braided hoses
[Re: Crops]
#1104937
04/04/19 02:17 AM
|
Joined: Feb 2001
Posts: 2,356
Body Damage is Cool
|
Check with a hydraulic hose shop. They should be able to reuse the ends of your hose and replace the flexible section.
Mitsu # 6 - 98 6G72 Montero Sport, Locking Rear Diff, Aisin Manual Hubs, 31x10.5
Mitsu # 7 - 02 6G74 Montero Limited
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5872 MB (Peak: 0.6360 MB) Data Comp: Off Server Time: 2026-05-29 20:04:49 UTCValid HTML 5 and Valid CSS 
