I need some help with exaust backfiring

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: I need some help with exaust backfiring [Re: RaiderpowerV6] #1105074 06/12/19 10:54 AM

Joined: Dec 2006

Posts: 163

Franklin IN

cheesegrater Offline

Wheeler

Sounds like the distributor is not timed properly. Set the engine number one cylinder to TDC using the mark on the crankshaft then check that the rotor is pointing to the number one contact post on the distributor cap. If that is good then you may have a timing belt problem.

Entire Thread
Subject	Posted By	Posted
I need some help with exaust backfiring	RaiderpowerV6	06/11/19 11:33 PM
Re: I need some help with exaust backfiring	cheesegrater	06/12/19 10:54 AM
Re: I need some help with exaust backfiring	RaiderpowerV6	06/13/19 11:37 PM
Re: I need some help with exaust backfiring	Bigshankhank	06/14/19 11:21 AM
Re: I need some help with exaust backfiring	cheesegrater	06/14/19 11:42 AM
Re: I need some help with exaust backfiring	rxinhed	06/14/19 03:05 PM
Re: I need some help with exaust backfiring	RaiderpowerV6	06/15/19 05:22 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.404s Queries: 16 (3.402s) Memory: 0.6032 MB (Peak: 0.6362 MB) Data Comp: Off Server Time: 2026-05-27 09:58:07 UTC
Valid HTML 5 and Valid CSS