Lower ball joint GEN1

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Lower ball joint GEN1 #1105502 03/14/20 06:45 PM

Joined: Apr 2018

Posts: 108

Charlotte, NC USA

chadzeilenga Offline

Wheeler

Ok, IÔÇÖm convinced IÔÇÖm missing something here, but what is required to change the lower ball joint on a 4WD GEN1? I donÔÇÖt seem to have the clearance above it to remove as the CV is in the way.

Entire Thread
Subject	Posted By	Posted
Lower ball joint GEN1	chadzeilenga	03/14/20 06:45 PM
Re: Lower ball joint GEN1	81for91	09/16/20 04:57 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.575s Queries: 15 (3.573s) Memory: 0.5939 MB (Peak: 0.6268 MB) Data Comp: Off Server Time: 2026-06-04 02:00:27 UTC
Valid HTML 5 and Valid CSS