replace master cylinder

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: replace master cylinder [Re: nvmonty] #1106193 04/07/21 11:49 AM

Joined: Sep 2006

Posts: 2,712

East Wallyworld Vermont

OldColt

Roll Me Over

It should lift up. Might want to dribble a little dish soap down where the metal bracket slides in and rock the reservoir a bit to break the friction.

Cheers, Charlie
If It ain't broke, Modify it!
87 Montero turbo Converted back in Spring1989
95 Montero SR 3.8 DOHC Only one?
93 Pajero 3 door 6G75 Mivec with paddle shifted 5 speed
Then a Gen2 SR with full coil independent suspension.

Entire Thread
Subject	Posted By	Posted
replace master cylinder	nvmonty	04/07/21 05:29 AM
Re: replace master cylinder	OldColt	04/07/21 11:49 AM
Re: replace master cylinder	nvmonty	04/07/21 05:30 PM
Re: replace master cylinder	nvmonty	04/08/21 03:21 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.493s Queries: 16 (3.490s) Memory: 0.5976 MB (Peak: 0.6306 MB) Data Comp: Off Server Time: 2026-06-04 00:52:12 UTC
Valid HTML 5 and Valid CSS