replace master cylinder

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: replace master cylinder [Re: nvmonty] #1106195 04/08/21 03:21 AM

Joined: Feb 2003

Posts: 227

Carson City NV

nvmonty

Wheeler

Turns out there are two detents at the bottom so if one pulls straight out on the bottom and then lifting it slides up. Takes some effort at the old plastic is not as flexible. But it is surprisingly tough for a vehicle made in 1989!

90 LWB RS: 3 L/mt, JBaker springs, bushings, swaybars. KYB shocks tweaked, 134k mi, original owner.
97 LWB SR: SOLD Sep. 2014 131,006 mi: running boards removed, BFG 31x10.5 AT/KO tires, Air locker, AirLifts, KYB shocks, Cibie fogs, 3rd owner.

Entire Thread
Subject	Posted By	Posted
replace master cylinder	nvmonty	04/07/21 05:29 AM
Re: replace master cylinder	OldColt	04/07/21 11:49 AM
Re: replace master cylinder	nvmonty	04/07/21 05:30 PM
Re: replace master cylinder	nvmonty	04/08/21 03:21 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.636s Queries: 16 (4.227s) Memory: 0.6001 MB (Peak: 0.6331 MB) Data Comp: Off Server Time: 2026-06-02 12:19:37 UTC
Valid HTML 5 and Valid CSS