Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Mitsu shift shaft, Sport or Gen 3 #1106180 04/05/21 12:10 AM
Joined: Sep 2006
Posts: 2,712
OldColt Offline OP
Roll Me Over
*****
I am in need of a shifter shaft that passes through the side of a computer shifted automatic. This is the shaft the cable arm mounts to and passes through the selector switch.
Mitsu Pn, MR336341

This shaft should interchange with most all Asian computer shifted Automatics used in Jeeps, Toyotas, Hyundia and Mitsubishi RWD platforms. Might be the same in BMW and Volvos as well as others.

Some repair shop before me welded the shift arm on resulting in the selector switch being damaged.

I am striking out on new sources, not done trying though.


Cheers, Charlie
If It ain't broke, Modify it!
87 Montero turbo Converted back in Spring1989
95 Montero SR 3.8 DOHC Only one?
93 Pajero 3 door 6G75 Mivec with paddle shifted 5 speed
Then a Gen2 SR with full coil independent suspension.
Re: Mitsu shift shaft, Sport or Gen 3 [Re: OldColt] #1106199 04/08/21 12:07 PM
Joined: Sep 2006
Posts: 2,712
OldColt Offline OP
Roll Me Over
*****
I have ordered a new shaft coming out of Japan, shaft is cheap, shipping is stupid.


Cheers, Charlie
If It ain't broke, Modify it!
87 Montero turbo Converted back in Spring1989
95 Montero SR 3.8 DOHC Only one?
93 Pajero 3 door 6G75 Mivec with paddle shifted 5 speed
Then a Gen2 SR with full coil independent suspension.

Moderated by  4x4Wire, code33, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5885 MB (Peak: 0.6364 MB) Data Comp: Off Server Time: 2026-05-25 07:33:17 UTC
Valid HTML 5 and Valid CSS