Weber Carb Unknown Parts

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Weber Carb Unknown Parts [Re: Spduffee] #1106281 05/14/21 03:13 AM

Joined: Feb 2021

Posts: 21

BellevuecomvWa USA

Spduffee

Need a Spot

Thanks for the replies.
I have posted photos on the drive before with no problem. Were you not able to open them?
Anyway, I found out they are for plugging the exhaust manifold where the emissions thing screwed into.
Wish I would have known that before I welded them shut. Same difference, I guess.

Last edited by Spduffee; 05/14/21 03:15 AM.

"It idles rough in neutral" "We won't be in neutral" "Oorah"

Entire Thread
Subject	Posted By	Posted
Weber Carb Unknown Parts	Spduffee	05/13/21 08:29 PM
Re: Weber Carb Unknown Parts	4x4Wire	05/14/21 01:02 AM
Re: Weber Carb Unknown Parts	Lev_from_CA	05/14/21 01:53 AM
Re: Weber Carb Unknown Parts	Spduffee	05/14/21 03:13 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.029s Queries: 16 (3.376s) Memory: 0.5985 MB (Peak: 0.6315 MB) Data Comp: Off Server Time: 2026-05-28 23:48:08 UTC
Valid HTML 5 and Valid CSS