Gen I back door retrainer

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen I back door retrainer [Re: nvmonty] #1106336 06/15/21 03:22 PM

Joined: Dec 2007

Posts: 2,348

Orange Park, FL

Mudraider

Body Damage is Cool

There's a couple guys breaking Gen 1's on the MMUSA Exchange page. I see a need for one of those in my future. I'm guessing the 37 hanging off the door has caused wear on one of the two sleeves and it's getting thin.

89 SWB, V-6 5SPD, OME Shocks, 16.5X37's, 2"BL, SR axle, Gen2 brakes, Lincoln w/Superwinch

Entire Thread
Subject	Posted By	Posted
Gen I back door retrainer	nvmonty	06/07/21 07:23 PM
Re: Gen I back door retrainer	rxinhed	06/09/21 05:15 AM
Re: Gen I back door retrainer	nvmonty	06/09/21 07:52 PM
Re: Gen I back door retrainer	rxinhed	06/10/21 01:36 AM
Re: Gen I back door retrainer	nvmonty	06/15/21 04:51 AM
Re: Gen I back door retrainer	Mudraider	06/15/21 03:22 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.500s Queries: 16 (3.498s) Memory: 0.6029 MB (Peak: 0.6359 MB) Data Comp: Off Server Time: 2026-06-21 17:54:35 UTC
Valid HTML 5 and Valid CSS