Starter not engaging.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Starter not engaging. [Re: Trailmonkey] #1106440 08/22/21 02:41 AM

Joined: Aug 2020

Posts: 191

North Florida

Trailmonkey Offline

Wheeler

Teeth on flexplate have definite signs of peening on the face and a bur on the side. Starter teeth peened on the front and wore on the one side, dremeled a bevel and it starts easy as before.
Sooo. I get to tiddy up the flexplate per tooth. From under the truck, starter gear off and do a better job on it and done deal. Pain In the neck, yes, but free.

91 (Gen1) Monty, 3.0L V6, Auto 4 Door.
Disabled Driver.

Entire Thread
Subject	Posted By	Posted
Starter not engaging.	Trailmonkey	08/13/21 03:46 AM
Re: Starter not engaging.	Mudraider	08/18/21 02:02 PM
Re: Starter not engaging.	Trailmonkey	08/21/21 03:57 PM
Re: Starter not engaging.	Trailmonkey	08/22/21 02:41 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.352s Queries: 16 (3.350s) Memory: 0.5969 MB (Peak: 0.6298 MB) Data Comp: Off Server Time: 2026-05-26 18:03:04 UTC
Valid HTML 5 and Valid CSS