Crank pulley tool for 3.2 Troop (long)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Crank pulley tool for 3.2 Troop (long) #134436 01/10/03 04:34 AM

Anonymous

Unregistered

I've always just put it in gear, 5th gear. Lower gears usually don't work. Same with tightening. Perhaps your wrench would allow a more exact torque, though. Nice work.

Entire Thread
Subject	Posted By	Posted
Crank pulley tool for 3.2 Troop (long)	Ed C	10/22/02 11:50 PM
Re: Crank pulley tool for 3.2 Troop (long)	Anonymous	10/23/02 01:43 AM
Re: Crank pulley tool for 3.2 Troop (long)	AZPetrak	10/23/02 04:59 PM
Re: Crank pulley tool for 3.2 Troop (long)	Anonymous	01/08/03 04:12 PM
Re: Crank pulley tool for 3.2 Troop (long)	Eric Upchurch	01/08/03 10:40 PM
Re: Crank pulley tool for 3.2 Troop (long)	Ed C	01/09/03 05:47 AM
Re: Crank pulley tool for 3.2 Troop (long)	Anonymous	01/10/03 04:34 AM
Re: Crank pulley tool for 3.2 Troop (long)	Anonymous	01/10/03 06:54 AM
Re: Crank pulley tool for 3.2 Troop (long)	Ed C	01/10/03 08:11 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.543s Queries: 15 (3.511s) Memory: 0.6081 MB (Peak: 0.6411 MB) Data Comp: Off Server Time: 2026-06-21 16:46:12 UTC
Valid HTML 5 and Valid CSS