Starter problem after contact replacement

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Starter problem after contact replacement #16624 04/25/03 03:31 AM

Joined: Feb 2003

Posts: 65

san jose,ca.

2utadud

Getting the Wheeling Fever

same problem on my wife's car. After replacing
the brass contact, the click-click is still
there. It is sometimes not all the time click-
click. It's an '87 toy supra. The starter is pita
to work on. Tried removing once before and took
me about 5 hours to remove and install. Does this
model has the lsd? how do i know? thanx

Entire Thread
Subject	Posted By	Posted
Starter problem after contact replacement	ScaldedDog	04/23/03 03:32 PM
Re: Starter problem after contact replacement	4Crawler	04/23/03 04:06 PM
Re: Starter problem after contact replacement	ScaldedDog	04/23/03 04:35 PM
Re: Starter problem after contact replacement	Red_Chili	04/23/03 04:41 PM
Re: Starter problem after contact replacement	2utadud	04/25/03 03:31 AM
Re: Starter problem after contact replacement	ScaldedDog	04/26/03 02:20 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.526s Queries: 15 (3.524s) Memory: 0.6036 MB (Peak: 0.6366 MB) Data Comp: Off Server Time: 2026-06-06 17:23:33 UTC
Valid HTML 5 and Valid CSS