I've had my new stage 5 sky arms for a few weeks now, sitting in my garage getting paint and waiting to replace my AllPro arms. I haven't had time to put them in since I've been playing Mr. Mom for our new baby boy.

Today, I wanted to double check some of the comparison measurements. Center pin to tie rod hole is about 4.5", about 1/2" shorter than the APs. Good for tie rod/pitman arm clearance. Now for the "BUT"; the height difference is not in Sky's favor. The APs are 2" tall measured from the knuckle mating surface to the top of the arm where the FJ80 TRE fits. The Skys are a very disappointing 1 7/16". I can almost garantee they will not clear my 4" AP springs. My bad for not getting those numbers first.

Anyway, now I know, and so do you all. APs are longer by 1/2" but they are taller by that much too. I guess it's time to move my steering box forward.

Anyone who has the stage 5 arms and they work (not rubbing the tie rod all over the spings at full-lock turns and and full droop) let me/us know what springs you are running, please.