Try this out...
<img src="http://www.zhub.com/ozarktruckoutfitters/listings/22.jpg" alt="" />

http://www.zhub.com/ozarktruckoutfitters/listings/22.html

This drops down but you could probably have a similar one made but with less drop. Just have a local fabricator make one since your only using it for your bike rack. It should be pretty easy... 2x2 tube steel and 3/8" plate steel.

FWIW, I too own a dual suspension bike (GT Team RTX & XRC-1) but they both have a top tube that I can clamp on with my rack. Both Yakima and Thule make top tube adapters for bikes w/out top tubes.

<small>[ 12 July 2002, 12:30 PM: Message edited by: off-roader ]</small>


Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page