[color:"red"]Mitsubishi[/color] Torque Converter Bolts

There is an aftermarket warning out concerning these bolts which states that old torque converter bolts stretch over time which can damage the torque converter housing and internals if reused. In order to prevent this it is recommended that you should either 1) grind down the old bolts by a millimeter or two, or 2) purchase new bolts to use when installing your torque converter.

Though the warning concerns primarily lockup converters used in many (if not all) '91 and later Monteros, I believe I may have some experience with this problem with my old non-lockup torque converter. Having knowledge of the issue I decided it was easiest to purchase new bolts and I would urge you to do the same if you or your mechanic are performing work which will seperate the torque converter from the driveplate.

(6) MD950120* - Bolt, Transmission Connecting

*The part number may be different between model years but I'm 99% certain it is the same bolt. Also the bolt is standard not metric thread.

Edit: That part number is for one bolt.

Post deleted by FrankR

Sliding Rear Side Window Latches...
Montero and Raider 1983-1991
PN# MB134115
$7.36 each from
http://www.parts.com/partlocator/index.cfm?siteid=214144
<img src="/forums/images/graemlins/smile.gif" alt="" />

Gen I hazard light switch: MB330277

SWB weatherstrip, exterior, the one that likes to fly off when driving down the freeway: MB364413 (driver's side).

John B.

US Spec 3.0L Montero Sport w/ Auto Transmission


Transfer Case part numbers:
MR453346 : GEAR,T/F INPUT
MB896674 : GEAR,T/F LOW SPEED
MB896675 : GEAR,T/F COUNTERSHAFT

1989 Dodge Raider L4 2.6 Carb. Man W/Rear leaf springs
Autolite Pro-Fit silicone spark plug wires 86606
MSD Ignition 8.5 mm Super conductor wires PN 31659
Micron distributor cap BD556 WA479R
Micron Rotor WA331 BR503
Napa Premium XL Alternator/Water pump belt 9380
Gates Power Steering belt XL 9295
Micron Fuel filter GF61M G12 F20011M
K&N high flow air filter E-2723
Purolator air filter A34494
Bosch Premium oil filter 3320
PDQ U-Joint rear driveshaft 1-1516
Carquest lower ball joint K9009
Explorer ProComp ES3000 Shock front 314515
Explorer ProComp ES3000 Shock rear 319500

Part # Description QTY Price
------------------------------------------------------------------------
A1C132464 13-2464/MC39972 NEW MSTR CYL 1 $63.99

Rockauto, Cardone select master cylinder. This is a reboxed, japanese made, brand new NABCO part that is the same as part the factory sells. Basicly its a complete new unit for less money than the factory rebuild kit.

Fits 1990 Montero.

Kevin

i copyed this from mister bishi's post for 5.29 gears,it sounds perfect for being in here.


Hey guys I have been bombarded with enquiries about these lately and I just can't keep up.
I've spoken to the supplier and he has agreed to deal directly with individual customers as I just haven't got the time anymore to expadite these purchases.
The company is WADC (West Australian Drive Components) http://www.wadc.com.au/
Contact is Vincent Gallucio vincent@wadc.com.au

His email as follows with prices :-

Dear Frank,

Pricing as follows.

MB241981 front 8ö CW&P = $540.00 Aus + tax (10%)

MB598486 rear 9ö CW&P = $640.00 Aus + tax (10%)

The above price does not include freight to Victoria.
Delivery time approximately 2 months from order confirmation.
It is possible to air freight the goods from Japan to US if you need them urgently. (additional cost)
Payment terms are the same as your previous order with 85% of the invoice total payable at the time of order confirmation, with the balance due at delivery into Australia.

Kind Regards

Vincent Galluccio

(WA Drive Components)

PS - I'm still happy to advise of the correct part number of 5.29 to make sure it's the right one.
Please bear in mind the Vincent doesn't know anything about what 5.29 fits what model he will only be able to quote on supply of a given part no.

Cheers, Frank.


Part no's are :-
4 cylinder (all)
front 7.25" MB185457, rear 8" MB241981
Gen 1 3.0 V6 (all)
front 8" MB241981, rear 9" MB598486
Gen 2 3.0 V6 (auto only)
front 7.25" MB831032, rear 9" MB598486

Additionally, the inner gasket (the one which sits between the hublock assembly and the wheel hub) is Toyota part number 43422-60010. If you go to a Toyota parts department, let them know that all of these parts are found on Aisin manual locking hubs which came on 83-89 Toyota pickups. All these seals fit the Mitsubishi Aisin manual hubs perfectly.