Hi guys,

Anyone have the part number for the Fuel Filler Hose on the Gen I 3.0?


Thanks
Matt

MB554777

hi guys , if anyone out there knows a part # for a 91 pajero head light can you please let me know . thank you very much

Replacement bulb for Gen II digital compass.
Mitsu p/n: MR283314
Manufacturer: Mitsu (I have not found a 3rd party manufacturer/source such as Sylvania/Osram or RadioShack.
Source: Your local OEM Mitsu Parts dealer
Cost: $2.50 as of 31, July 2009 at Stevens Creek Mitsubishi, San Jose, California
Will post pics this evening once I get home. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Gen 1 Heater fan resistor.
MB272517 was about 30 dollars when I bought one about a year ago.

Bought a new switch at the same time also from the dealer, when I find that number i'll post it up as well.

*edit*
Could we get this stickied to keep it up top? Mabey it will help reduce the number of "what is this part number" question <img src="/forums/images/graemlins/smile.gif" alt="" />

It is sticky, check the very first post on this page.

Longer upper radiator hose for GenI with body lift.

NAPA P/N 8637 ~$20 retail as of 11/13/09.

95-96 3.0 24V SOHC timing pulleys need to be ordered aftermarket as 3.5 DOHC.

For Gen II 3.0 24V SOHC motors, there is mixed/wrong data out in the aftermarket. With my 95's 180k service, I ordered a pulley kit for the timing belt change from the local store. The kit only comprised a tensioner puller, and it was the wrong one. This was a Dayco product and looking at other places online brought up the same number.

Wondering what was up I launched CAPS and compared the Mitsu numbers between the three motors- 3.0 24V SOHC, 3.5 DOHC, and 3.0 12V. My 3.0 24V SOHC needs the same pulleys as the 3.5 DOHC. What I got was for the 3.0 12V.

Not sure what other parts may be similarly afflicted. I do know that when ordering other such parts in the future, I will be sure to cross reference between the three motors.

Electronic compass light bulb for '95 SR/Gen 2
MB898179
Bulb, Console
Mitsubishi dealer part
Twist the light bulb's base counter-clockwise to remove after removing center guage cluster hood, removing cluster from dash, removing screws that hold cluster's plastic screen and removing wiring harness hold-down screws.

Bulb is specialty because of its base and because it has a plastic cap over it to alter the output color.

Cost should be around $2. Compass is not visible in daylight or at night if the bulb is burned out. Compass has to be recalibrated after reinstallation. Consult owner's manual.

John B.

KM132I, KM123K, KM145 manual trans 1970-89 gasket set.
Felpro # TS80310-1 $21.00 from my local Kragen store.
Includes multiple gaskets for the various trans models.