An SAS is a major project and mucho $$$$, and I only know of one. He spent (if I remember right) about $19k (yes, that's NINETEEN THOUSAND DOLLARS!) on the swap on a gen2. Granted, he went with brand new parts and professional install, but Jeezus, that's a wad of money. If memory serves, that was a radius arm/coil spring/Dana 60(?) locker swap with crossover steering.

On the Starion lsd, I think Kary (Big Blue) worked it out, but I don't know exactly how, and would like to know, as the IFS front end hasn't failed me yet offroad, and I don't even have trimmed bump stops. I believe that some machining of the lsd carrier is required to fit the Monty housing, and there may also be axle spline count issues. It also looks feasible to me to modify the frame pads the bump stops hit to give a little more articulation, but I don't know the angle limits on the front axle CV joints.

You might do a search and find out more details on the SAS, but that thread got more than a little heated (the guy that did the swap has been MIA ever since) and may have been deep sixed.

<small>[ February 16, 2003, 10:37 PM: Message edited by: fasteddy ]</small>


Not responsible for advice not taken...