Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Front locker or Limited Slip (88 Mighty Max) #199312 02/17/03 04:16 AM
Joined: Jan 2003
Posts: 54
mwhite Offline OP
Getting the Wheeling Fever
I know nobody makes a locker but I have heard of people
putting a starion limited slip diff into the axles, checked archives
there was a thread but it did not say if it worked. Also can a
arb or detroit be modified or any other, also what would be
involed to but a different axle under front end either a ifs or
sa


88 Mighty Max 2.6 (170,000miles)
3 body lift, 1 1/2 torsion lift, lower bumpstops, 4.625
gears, 31 1/2 buckshot radials,warn 8274
Re: Front locker or Limited Slip (88 Mighty Max) #199313 02/17/03 04:36 AM
Joined: Jan 2001
Posts: 13,649
fasteddy Offline
Web Wheeler
*****
An SAS is a major project and mucho $$$$, and I only know of one. He spent (if I remember right) about $19k (yes, that's NINETEEN THOUSAND DOLLARS!) on the swap on a gen2. Granted, he went with brand new parts and professional install, but Jeezus, that's a wad of money. If memory serves, that was a radius arm/coil spring/Dana 60(?) locker swap with crossover steering.

On the Starion lsd, I think Kary (Big Blue) worked it out, but I don't know exactly how, and would like to know, as the IFS front end hasn't failed me yet offroad, and I don't even have trimmed bump stops. I believe that some machining of the lsd carrier is required to fit the Monty housing, and there may also be axle spline count issues. It also looks feasible to me to modify the frame pads the bump stops hit to give a little more articulation, but I don't know the angle limits on the front axle CV joints.

You might do a search and find out more details on the SAS, but that thread got more than a little heated (the guy that did the swap has been MIA ever since) and may have been deep sixed.

<small>[ February 16, 2003, 10:37 PM: Message edited by: fasteddy ]</small>


Not responsible for advice not taken...
Re: Front locker or Limited Slip (88 Mighty Max) #199314 02/17/03 04:47 AM
Joined: Jan 2003
Posts: 54
mwhite Offline OP
Getting the Wheeling Fever
Just wanted to know about axle swap,
but would like to either find out about modifying
a locker or find a starion lsd. But I would like
to know about any problems in install


88 Mighty Max 2.6 (170,000miles)
3 body lift, 1 1/2 torsion lift, lower bumpstops, 4.625
gears, 31 1/2 buckshot radials,warn 8274
Re: Front locker or Limited Slip (88 Mighty Max) #199315 02/17/03 07:08 AM
Anonymous
Unregistered
Yes, Kary "said" he did it, but wants $$$ to tell....so have credit card # ready on hand.... <img border="0" title="" alt="[Embarrassed]" src="images/icons/blush.gif" />

86' and under Starion lsd's is what you're looking for

Re: Front locker or Limited Slip (88 Mighty Max) #199316 02/17/03 11:20 PM
Joined: Oct 2002
Posts: 205
tkal Offline
Wheeler
I was considering having a solid front as well. I belive that if you fab yourself most of the parts and get a used axle it can be done for about $500 open diff. This is just a guess. If the motor I have for my MM works out and I want/can keep the truck I will eventualy do this swap. I will know in about 1-2 months if I am going to do this swap. I am planing on using a dana 44 from a Bronco, I think the diff is on the correct side.

I work at a metal fab shop so I can get brackets bent and weld them up. If someone wants to help me with designe I will fab up a second set of brackes and crap for the volunteer. I was planning on leaf spring. If this intrestes you email me tkal@techemail.com

Over all I think that a swap will work out better in the long run. More parts for lsd or locker more travel and no CV joints or boots to break or crack.

<small>[ February 17, 2003, 05:23 PM: Message edited by: tkal ]</small>


'88 D-50 2.6 needs some love.
Re: Front locker or Limited Slip (88 Mighty Max) #199317 02/18/03 04:03 AM
Joined: May 2001
Posts: 4,079
lordtrunks Offline
Roll Me Over
*****
I happen to have a front detroit for sale that will work in a 2.6 rig


89 2 dr turbo diesel
89/88 "Backwoods sas"
Re: Front locker or Limited Slip (88 Mighty Max) #199318 02/18/03 04:38 AM
Joined: Jan 2000
Posts: 1,818
Charlie Belew Offline
Body Damage is Cool
trunks, with everything else that you have done to your rig, why are you selling your Detroit?

That "major project" SAS was done to a Montero Sport.

<small>[ February 17, 2003, 10:39 PM: Message edited by: Charlie Belew ]</small>


None
Re: Front locker or Limited Slip (88 Mighty Max) #199319 02/18/03 05:11 AM
Joined: Oct 2002
Posts: 205
tkal Offline
Wheeler
If I like this motor I am planning on doing the swap anyhow. I am just wondering if anyone wants to help designe the front and make the swap themself.


'88 D-50 2.6 needs some love.
Re: Front locker or Limited Slip (88 Mighty Max) #199320 02/19/03 12:18 AM
Joined: Jan 2003
Posts: 54
mwhite Offline OP
Getting the Wheeling Fever
Lordtrunks how much for the locker??


88 Mighty Max 2.6 (170,000miles)
3 body lift, 1 1/2 torsion lift, lower bumpstops, 4.625
gears, 31 1/2 buckshot radials,warn 8274







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.010s Queries: 14 (0.007s) Memory: 0.6257 MB (Peak: 0.7236 MB) Data Comp: Off Server Time: 2026-11-16 01:31:17 UTC
Valid HTML 5 and Valid CSS