94monty-

You should post up a picture of your truck... I really like the metalic blue too!!

Some starter info:

Body lift is made by Roger Brown:
http://4crawler.cruiserpages.com/4x4/ForSale/BodyLiftKit.shtml#FAQ

It is fairly easy to install... but takes time to do it correctly. I spent about 2 days working on it with some help. It is not overly difficult just some things need to be customized. I had a shop weld the front bumper mounts 2" higher... and just customized the rear bumper to get it up 2" - Cost involved (besides your labor) $115 for kit - I paid $150 for the welding... Including the rock slider relocation, hard body mounts, and front bumper.

Some general costs involved with the suspension lift:

Rear Custom 3" lift springs: $230
Install of rear springs: $100
Front Manual Hubs: $80
Crank T Bars- Free
Cut bump stops- free
Wheel Alignment- $60 (major adjustment needed!!)
Rear Sway bar removed- Free
Probably some other stuff... I'm sure... But figure around $500 or so.

It sits about 5" higher than stock... and with the 31" tires even higher... The BFG AT are used for on road... As it goes a bunch of use!!! The picture with the 31" BFG is before the body lift (I think). With the 33" Swampers it sits much higher!! All the lift was required to fit the Swampers on 10" wide rims... which gives it a nice stance.

Hope that gets you on your way! <img border="0" title="" alt="[Big Grin]" src="images/icons/grin.gif" />