|
|
|
|
Re: CV joints and max tire size
#213386
07/02/03 08:27 AM
|
Joined: Dec 2000
Posts: 1,674
Body Damage is Cool
|
Hmmm over here there are quite a few guys with V6's running 35"s even with front lockers with little trouble maybe the odd CV and tie rod. I personally wouldn't run bigger than 33"s on a 2.6 as the CV's are smaller (spline and axle diameter are the same though). I know a guy with a Gen 1 2.6 (front Detroit locker) who was busting CV's all the time until he upgraded to the V6 ones and only busts them now and then. But it's more driving style with him. I believe there is a big difference between 33"s and 35"s, that extra 1" under the pumpkin translates to a lot offroad. Time and again I go wheelin with 35" rigs and I'm the one scraping the rear pumpkin with 33"s having a hard time where they have the extra clearance. Thats why I'm upgrading to 35"s after the body lift.
I just luv my "clacker Jabber".................
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 4.441s Queries: 15 (4.438s) Memory: 0.6085 MB (Peak: 0.6415 MB) Data Comp: Off Server Time: 2026-11-17 11:52:39 UTCValid HTML 5 and Valid CSS