Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
What size nut for pinion seal? #223669 08/17/02 04:23 AM
Joined: Nov 2001
Posts: 60
R
RWD Offline OP
Getting the Wheeling Fever
Hi Guys,
I have to change the pinion seal on the rear dif of my 93 T-100 4X4. Anyone know what size mm nut it is? I'd like to make sure I have the correct socket before I start the job. Bob

Re: What size nut for pinion seal? #223670 08/17/02 02:17 PM
Joined: Nov 2001
Posts: 60
R
RWD Offline OP
Getting the Wheeling Fever
Never mind, I found out it's a 30 mm nut <img border="0" title="" alt="[Smile]" src="images/icons/smile.gif" />

Re: What size nut for pinion seal? #223671 08/22/02 06:53 PM
Joined: Feb 2000
Posts: 4,160
ErikB Offline
Toyota Moderator
Or 1-3/16" (usually cheaper). <img border="0" title="" alt="[Wink]" src="images/icons/wink.gif" />


'97 4Runner, '06 F350, '86 4Runner, '05 WR450
http://home.4x4wire.com/erik

Moderated by  4x4Wire, Dandeman, ErikB, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 14 (0.004s) Memory: 0.5907 MB (Peak: 0.6431 MB) Data Comp: Off Server Time: 2026-06-20 18:43:23 UTC
Valid HTML 5 and Valid CSS