Valve clearances on rebuilt engine

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Valve clearances on rebuilt engine #236484 06/03/03 10:00 PM

Joined: Jan 2003

Posts: 81

Central Minnesota

Sword King Offline

Getting the Wheeling Fever

Both Chilton's and Haynes call for .006 on the intake, .008 on the exhaust for a 2.3L.

The 4ze1 uses .008 for both.

2x '88 2.6L Troopers (one for parts)
'86 2.3L Trooper
'99 Acura SLX

Entire Thread
Subject	Posted By	Posted
Valve clearances on rebuilt engine	griffith	06/03/03 04:08 PM
Re: Valve clearances on rebuilt engine	Anonymous	06/04/03 05:06 AM
Re: Valve clearances on rebuilt engine	Sword King	06/03/03 10:00 PM
Re: Valve clearances on rebuilt engine	griffith	06/03/03 11:32 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.695s Queries: 15 (3.693s) Memory: 0.5982 MB (Peak: 0.6311 MB) Data Comp: Off Server Time: 2026-06-25 17:50:19 UTC
Valid HTML 5 and Valid CSS