Timing Belt Tracking problem

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Timing Belt Tracking problem #237205 06/29/03 10:56 PM

Joined: Mar 2002

Posts: 108

Edmonton, Alberta Canada

coldrain

Wheeler

Removed out the 2.3L engine and installed 2.6L enngine. Still chasing some oil leaks but noticed a rubbing noise coming from the front of the engine. Removed the top half cover and the timing belt is creeping forward rubbing up against the belt cover. Before installing the 2.6l I installed a Delta Cam. Any ideas what can cause the timing belt to have a tacking problem?

<small>[ June 29, 2003, 07:30 PM: Message edited by: coldrain ]</small>

Entire Thread
Subject	Posted By	Posted
Timing Belt Tracking problem	coldrain	06/29/03 10:56 PM
Re: Timing Belt Tracking problem	coldrain	06/30/03 03:54 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.474s Queries: 15 (3.472s) Memory: 0.5927 MB (Peak: 0.6257 MB) Data Comp: Off Server Time: 2026-07-16 12:48:34 UTC
Valid HTML 5 and Valid CSS