Well, for about the last 5,000 miles IÆve been driving around with a small exhaust leak, which would disappear when the engine was warm. Yesterday, I guess that the little leak had enough of being ignored, and it decided to make itself known. I looked under the hood and found that the manifold had cracked, clear through, and left a 2mm gap between the now 2 parts of the exhaust manifold (right between the 2 and 4 cylinder).

Obviously, I need to replace this, and I went to www.car-parts.com to look for another part, and the results came back with manifolds from Camaros, Firebirds, S10 pickups and Blazers, with years ranging from 88-94, and engine sizes 2.8L, 3.1L, and 3.4L.

Now I know that these engines are all the same on the outside, for the most part, but has anyone ever swapped out one of these with a ônon-Isuzuö part from one of the results that were returned? I have located a 87 S10 Blazer (3.1L), and before I drop any money, I want to make sure that this will fit.

BTW: I have a Æ92 3.1L Rodeo.