RPM related grinding noise after swap.. any idea's

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: RPM related grinding noise after swap.. any idea's #237395 07/07/03 06:55 AM

Anonymous

Unregistered

Stones under a skidplate/bashplate?

Mine has a habit of after ploghing through shingle rivers of getting a few stones between the gearbox/transfer case housing and bashplate.
It seemed to be RPM realted, but really it was just the vibration grinding the stones i.e. engine vibration was RPM related.

Entire Thread
Subject	Posted By	Posted
RPM related grinding noise after swap.. any idea's	coldrain	07/07/03 06:13 AM
Re: RPM related grinding noise after swap.. any idea's	Steve W	07/07/03 06:25 AM
Re: RPM related grinding noise after swap.. any idea's	Anonymous	07/07/03 06:55 AM
Re: RPM related grinding noise after swap.. any idea's	houlster	07/07/03 07:40 PM
Re: RPM related grinding noise after swap.. any idea's	coldrain	07/07/03 10:05 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.503s Queries: 15 (3.500s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-07-15 12:51:54 UTC
Valid HTML 5 and Valid CSS