RPM related grinding noise after swap.. any idea's

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: RPM related grinding noise after swap.. any idea's #237396 07/07/03 07:40 PM

Joined: Dec 1999

Posts: 2,394

Mesa, AZ

houlster

Isuzu Moderator

How about you tell us what was "swapped"? Engine, solid axle, hubs, transmission, ???

--Dan

<small>[ July 07, 2003, 02:41 PM: Message edited by: houlster ]</small>

Entire Thread
Subject	Posted By	Posted
RPM related grinding noise after swap.. any idea's	coldrain	07/07/03 06:13 AM
Re: RPM related grinding noise after swap.. any idea's	Steve W	07/07/03 06:25 AM
Re: RPM related grinding noise after swap.. any idea's	Anonymous	07/07/03 06:55 AM
Re: RPM related grinding noise after swap.. any idea's	houlster	07/07/03 07:40 PM
Re: RPM related grinding noise after swap.. any idea's	coldrain	07/07/03 10:05 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.949s Queries: 15 (3.883s) Memory: 0.6013 MB (Peak: 0.6342 MB) Data Comp: Off Server Time: 2026-07-16 23:32:47 UTC
Valid HTML 5 and Valid CSS