3.4 engine mod vs. original ECM

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.4 engine mod vs. original ECM #239405 05/26/02 07:53 AM

Joined: Oct 2001

Posts: 945

Clear h2o Kansas USA

maxwell417 Offline

Rock Warrior

The original computer works just fine. The 2.8 to 3.4 swap is a basic long block swap. With drill and tap the holes for the starter. With a good O2 sensor and 4.3 tbi, your computer won't know the difference.

Curt B 89RS Calmini Header Delta Cam 33x10.5 BFG MTs & 90 Trooper 3.4 v6, SAS D44 ARB/Hobart 5.38s 35s my pictures

Entire Thread
Subject	Posted By	Posted
3.4 engine mod vs. original ECM	ElBarto	05/26/02 06:53 AM
Re: 3.4 engine mod vs. original ECM	maxwell417	05/26/02 07:53 AM
Re: 3.4 engine mod vs. original ECM	ElBarto	05/26/02 08:30 AM
Re: 3.4 engine mod vs. original ECM	Anonymous	05/28/02 07:36 PM
Re: 3.4 engine mod vs. original ECM	ElBarto	05/29/02 03:41 AM
Re: 3.4 engine mod vs. original ECM	Joelpat	05/29/02 06:05 AM
Re: 3.4 engine mod vs. original ECM	Jim_Paget	05/29/02 04:35 PM
Re: 3.4 engine mod vs. original ECM	Ed C	05/29/02 04:46 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.477s Queries: 15 (3.474s) Memory: 0.6084 MB (Peak: 0.6413 MB) Data Comp: Off Server Time: 2026-06-21 03:18:26 UTC
Valid HTML 5 and Valid CSS