3.2L Rodeo Starter....

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.2L Rodeo Starter.... #243921 09/28/02 05:03 AM

Anonymous

Unregistered

I had to remove the exhaust on my 97 rodeo 3.2 v6 to replace my starter. There is no other way to get it out. I had to remove the exhaust by taking off the manifolds. After that it just come right off. Make sure you soak those bolts with some good penetrating oil before you go taking them out.

Entire Thread
Subject	Posted By	Posted
3.2L Rodeo Starter....	Canucklehead	09/27/02 03:11 PM
Re: 3.2L Rodeo Starter....	TrooperMark	09/27/02 03:32 PM
Re: 3.2L Rodeo Starter....	Anonymous	09/28/02 05:03 AM
Re: 3.2L Rodeo Starter....	Anonymous	09/28/02 05:54 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.492s Queries: 15 (3.490s) Memory: 0.5984 MB (Peak: 0.6314 MB) Data Comp: Off Server Time: 2026-06-10 00:18:32 UTC
Valid HTML 5 and Valid CSS