Not to disagree Randii <img border="0" title="" alt="[Big Grin]" src="images/icons/grin.gif" />
Disagree away -- it is one of the things that makes for rich discussions.! <img border="0" title="" alt="[Big Grin]" src="images/icons/grin.gif" />

I agree with all of your points on the downsides to CVs (less ultimate angularity than single u-joints, kinda big, and expensive). Vibration resistance is the single best reason to run one, unless you win the lottery and elect to go for one of the 80-degree drop CV joints....

In a front, offroad use only setup, where the shafts routinely spinning at 5mph, i would think vibration is of little concern.
Here's the rub -- I'm assuming that Troy's location virtually guarantees him some winter on-road runs at or above 55 mph. I run a CV in the rear to minimize vibrations, and simple U-joints up front -- the difference is that I refuse to engage the front driveshaft at speed...

Randii


Randy Burleson
4x4Wire Managing Editor Emeritus
Mongrel Isuzu Amigo