Well Id change a few things. Im going through a frame up on an 81 CJ5 right now, its a bear.

First instead of Powder coat on frame POR 15 it. You wont chip/scratch POR15 and you will NEVER worry about rust.

http://www.por15.com/

I take it Durabak is simalar to Speed/Rhino liner? Im using POR15 on my underbody as well, Will Speedline the interior tub.

Why a body lift at all? why not 3-4 Inch suspension lift?

Only trick I can say is have SEVERAL cans of PB blaster on hand as well as tons of baggies for small parts that you can label. I will be replacing every single TORX bolt on this thing. If you can get rid of them do it as well.

Careful with the tub bolts, I know too many folks that ended up having to cut them out use a ton of PB on them.

Id worry about running 33's on stock AMC20 and Dana 30's at least look into a 1 piece axles, you may need to regear as well. I havent even crossed that bridge, was running 31's and cant decide if Im going 32 or swap axles and go 33's.

Good luck, post some pics of your progress.

Dave