175 or 210 mig UPDATE

Print Thread

Rate Thread

Re: 175 or 210 mig UPDATE #284699 03/05/03 09:31 AM

Joined: Feb 2001

Posts: 502

Houston, TX, USA

JimShrake

Rock Warrior

Unles you are planning on welding large volumes of thick 3/8"+ metal, the 175 is fine. I use one every day.

Also, the 175 has infinite voltage control vs 4-5 click settings on the 210.

<small>[ March 05, 2003, 03:32 AM: Message edited by: JimShrake ]</small>

Jim Shrake
www.ShrockWorks.com

Entire Thread
Subject	Posted By	Posted
175 or 210 mig UPDATE	Kajo	02/03/03 03:03 PM
Re: 175 or 210 mig UPDATE	Anonymous	02/03/03 04:44 PM
Re: 175 or 210 mig UPDATE	Kajo	02/03/03 05:19 PM
Re: 175 or 210 mig UPDATE	Anonymous	02/04/03 07:16 AM
Re: 175 or 210 mig UPDATE	Dandeman	02/05/03 04:42 AM
Re: 175 or 210 mig UPDATE	Anonymous	02/05/03 08:12 PM
Re: 175 or 210 mig UPDATE	Anonymous	02/15/03 07:45 AM
Re: 175 or 210 mig UPDATE	fourwd1	02/18/03 08:08 PM
Re: 175 or 210 mig UPDATE	Dandeman	03/02/03 01:51 AM
Re: 175 or 210 mig UPDATE	Anonymous	03/02/03 10:53 PM
Re: 175 or 210 mig UPDATE	Anonymous	03/03/03 06:15 AM
Re: 175 or 210 mig UPDATE	JimShrake	03/05/03 09:31 AM
Re: 175 or 210 mig UPDATE	Kajo	03/27/03 04:15 AM
Re: 175 or 210 mig UPDATE	Anonymous	03/28/03 07:03 AM
Re: 175 or 210 mig UPDATE	fourwd1	03/28/03 02:06 PM
Re: 175 or 210 mig UPDATE	Kajo	03/28/03 08:12 PM

Moderated by 4x4Wire, Dandeman, Mike Bondi

Hop To

4x4Wire Social: