Cutting Aluminum diamond plate ?

Print Thread

Rate Thread

Re: Cutting Aluminum diamond plate ? #284774 03/07/03 01:15 AM

Joined: Mar 2001

Posts: 61

SW Florida

Jeff B

Getting the Wheeling Fever

Thanks for the ideas.

"An 8-inch metal-cutting wheel in a circular saw
would work well, too."
A few comments in rec.craft.metalworking said the circular saw would cut very quickly but they recommended using an oil to prevent melting the aluminum and messing up the saw blade.

2002 Double Cab Prerunner V6
Hellwig rear anti-sway bar

Entire Thread
Subject	Posted By	Posted
Cutting Aluminum diamond plate ?	Jeff B	03/04/03 04:55 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	03/04/03 07:14 PM
Re: Cutting Aluminum diamond plate ?	randii	03/04/03 08:56 PM
Re: Cutting Aluminum diamond plate ?	Jeff B	03/07/03 01:15 AM
Re: Cutting Aluminum diamond plate ?	Jim_Paget	03/07/03 03:59 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	03/07/03 06:32 AM
Re: Cutting Aluminum diamond plate ?	Jeff the marmot	03/10/03 09:42 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	03/27/03 01:22 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	04/13/03 07:03 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	04/27/03 03:13 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	04/30/03 02:32 PM

Moderated by 4x4Wire, Dandeman, Mike Bondi

Hop To

4x4Wire Social: