Cutting Aluminum diamond plate ?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Cutting Aluminum diamond plate ? #284779 04/13/03 07:03 AM

Anonymous

Unregistered

Wood blades for SawZalls work well. I've cut some 2" thick 7075 T-6 that way. A little beeswax or WD helps a lot.

Entire Thread
Subject	Posted By	Posted
Cutting Aluminum diamond plate ?	Jeff B	03/04/03 04:55 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	03/04/03 07:14 PM
Re: Cutting Aluminum diamond plate ?	randii	03/04/03 08:56 PM
Re: Cutting Aluminum diamond plate ?	Jeff B	03/07/03 01:15 AM
Re: Cutting Aluminum diamond plate ?	Jim_Paget	03/07/03 03:59 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	03/07/03 06:32 AM
Re: Cutting Aluminum diamond plate ?	Jeff the marmot	03/10/03 09:42 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	03/27/03 01:22 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	04/13/03 07:03 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	04/27/03 03:13 AM
Re: Cutting Aluminum diamond plate ?	Anonymous	04/30/03 02:32 PM

Moderated by 4x4Wire, Dandeman, Mike Bondi

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.494s Queries: 15 (3.492s) Memory: 0.6103 MB (Peak: 0.6433 MB) Data Comp: Off Server Time: 2026-06-21 22:03:51 UTC
Valid HTML 5 and Valid CSS