Replaced brakepads were worn at an angle

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Replaced brakepads were worn at an angle #285782 07/15/03 03:44 AM

Joined: Oct 2002

Posts: 2,285

Boston (roslindale)

CPOM

Body Damage is Cool

Eric said "Inside the caliper on the rear brakes there is a little screw head or rivet or something that sticks up and is supposed to go on the side of the pad - but it's possible to install the pads with one of the pads slightly overlapping that."

Where exactly do i find this, and what is it for/do. Is it on the piston? This is not clear to me.

CHRIS
98 Amigo, 92 Pup

need a pickup 1st gen fuel level sender

Entire Thread
Subject	Posted By	Posted
Replaced brakepads were worn at an angle	CPOM	07/14/03 02:31 AM
Re: Replaced brakepads were worn at an angle	Anonymous	07/14/03 02:44 PM
Re: Replaced brakepads were worn at an angle	Anonymous	07/14/03 04:52 PM
Re: Replaced brakepads were worn at an angle	jezeric	07/14/03 06:40 PM
Re: Replaced brakepads were worn at an angle	txsoulfly	07/15/03 03:31 AM
Re: Replaced brakepads were worn at an angle	CPOM	07/15/03 03:44 AM
Re: Replaced brakepads were worn at an angle	Anonymous	07/15/03 04:27 AM
Re: Replaced brakepads were worn at an angle	MeatWagon	06/04/04 07:30 AM
Re: Replaced brakepads were worn at an angle	Anonymous	06/04/04 01:18 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social: