Painting a 1st Gen. Top

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Painting a 1st Gen. Top [Re: brentox] #290143 07/23/03 05:20 PM

Joined: Dec 2002

Posts: 24

Everett, WA

mxitup

Need a Spot

Ditto on the bed liner stuff. I bought a gallon of Duplicolor's spray on bedliner and thinned it as recommended on the container. I applied it with a cheap-o pressure pot spray gun ($20 thru Harbor Freight). Turned out great and has held up to abuse beautifully.

Entire Thread
Subject	Posted By	Posted
Painting a 1st Gen. Top	Anonymous	07/23/03 12:31 AM
Re: Painting a 1st Gen. Top	CAZ	07/23/03 01:55 AM
Re: Painting a 1st Gen. Top	brentox	07/23/03 03:06 AM
Re: Painting a 1st Gen. Top	Anonymous	07/23/03 03:46 AM
Re: Painting a 1st Gen. Top	mxitup	07/23/03 05:20 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 9.049s Queries: 16 (3.549s) Memory: 0.6003 MB (Peak: 0.6333 MB) Data Comp: Off Server Time: 2026-06-17 05:29:42 UTC
Valid HTML 5 and Valid CSS