|
|
CV joint, new or remanufactured?
#290253
07/23/03 03:19 AM
|
Joined: Dec 1999
Posts: 2,329
OP
Body Damage is Cool
|
I broke my CV inner CV boot. Autozone is the only one that could get it in my area. They have new for $150 or remanufactured for $100. OEM booth are $57 just for the innner and I haven't found anybody selling the outer. The new one are made by GCK . They are made in Taiwan or China but so does a lot of OEM driveshaft.
|
|
Re: CV joint, new or remanufactured?
[Re: Augie]
#290254
07/23/03 03:30 AM
|
Joined: Nov 2002
Posts: 7,892
Web Wheeler
|
HOLY CRAP!! I just logged on here to ask a VERY similiar question. I need to replace my front drive axle, and after calling around, I found I can get a complete right front assembly from the junk yard for 250-300 bucks...OR, I can order a remanufactured unit for 60 bucks! The reman comes with a lifetime warranty...so I could by two of each, and always have spares!! Is it worth it to buy the used ones? Is it worth buying new from Mitsu? I'm hoping to eventually put an lsd in the front, so I don't know if that's a factor in the decision. Thanks guys! I'll be able to buy with confidence with your help.
- '92 LWB V6 3.0 5 sp 33x10.5 BFG M/Ts & Bouncy seat - '95 LWB V6 3.0 Auto (Scrapped) - '05 Montero Limited. Bone stock <img src="/forums/images/graemlins/frown.gif" alt="" />
|
|
Re: CV joint, new or remanufactured?
[Re: stony-man]
#290255
07/23/03 03:36 AM
|
Joined: Dec 1999
Posts: 2,329
OP
Body Damage is Cool
|
Where do you get the reman for $60?
|
|
Re: CV joint, new or remanufactured?
[Re: stony-man]
#290256
07/23/03 03:36 AM
|
Joined: Jan 2001
Posts: 13,649
Web Wheeler
|
All the local rebuilders have gone out of the business, because the price of new shafts dropped to the same or lower than a reman. I'm a little leery about reman cv's because they machine the slots out larger and install bigger balls, and that has to weaken the cage some. I'd shop some more for a new price.
Not responsible for advice not taken...
|
|
Re: CV joint, new or remanufactured?
[Re: fasteddy]
#290257
07/23/03 04:01 AM
|
Joined: Nov 2002
Posts: 7,892
Web Wheeler
|
Man, I'd have thought anything that came with bigger balls would have been tougher :P Autozone said they can get it for 60 somethin'...but I'm sorry, that was for just the outter axle...I never did find out what the complete assembly was...but the "yards" all wanted around 150 for one out of a vehicle that I know nothing about <img src="/forums/images/graemlins/frown.gif" alt="" />
- '92 LWB V6 3.0 5 sp 33x10.5 BFG M/Ts & Bouncy seat - '95 LWB V6 3.0 Auto (Scrapped) - '05 Montero Limited. Bone stock <img src="/forums/images/graemlins/frown.gif" alt="" />
|
|
Re: CV joint, new or remanufactured?
[Re: stony-man]
#290258
07/23/03 04:03 AM
|
Joined: Nov 2002
Posts: 7,892
Web Wheeler
|
|
- '92 LWB V6 3.0 5 sp 33x10.5 BFG M/Ts & Bouncy seat - '95 LWB V6 3.0 Auto (Scrapped) - '05 Montero Limited. Bone stock <img src="/forums/images/graemlins/frown.gif" alt="" />
|
|
Re: CV joint, new or remanufactured?
[Re: stony-man]
#290259
07/23/03 04:15 AM
|
Joined: May 2003
Posts: 731
Rock Warrior
|
You cant keep your old ones. Have to turn in a core or pay $100.
|
|
Re: CV joint, new or remanufactured?
[Re: FranklinP]
#290260
07/23/03 04:17 AM
|
Joined: Nov 2002
Posts: 7,892
Web Wheeler
|
Why would you WANT to keep the old ones? <img src="/forums/images/graemlins/confused.gif" alt="" />
- '92 LWB V6 3.0 5 sp 33x10.5 BFG M/Ts & Bouncy seat - '95 LWB V6 3.0 Auto (Scrapped) - '05 Montero Limited. Bone stock <img src="/forums/images/graemlins/frown.gif" alt="" />
|
|
Re: CV joint, new or remanufactured?
[Re: stony-man]
#290261
07/23/03 04:36 AM
|
Joined: May 2003
Posts: 731
Rock Warrior
|
Woops I thought I read you were keeping them for spares but then I re-read and see it say you would buy two. My bad, or my glasses bad actually. <img src="/forums/images/graemlins/grin.gif" alt="" />
|
|
Re: CV joint, new or remanufactured?
[Re: FranklinP]
#290262
07/23/03 06:08 AM
|
Joined: Nov 2002
Posts: 4,127
Roll Me Over
|
Hey dudes, I'd purchased a set of boot rebuild kits for each front axle from the dealer a couple months ago totaling almost $200. My intentions were good, to remove the axles and rebuild the joints, but when I got a clear view of my CVs I noticed that they were rusted through.
I discovered that I could get my old axles rebuilt for $50-$90/ea. This was comparable to half as much as I'd paid for just the boot kits. I returned the boot kits, and have been putting off the front axle rebuilds because it looks like I am going to have to get into my own "project frontend" soon (rotors, brake lines, axles, bushings, bump stops, etc.).
My final decision on the matter was that it was more cost-effective to go with the rebuilt axles and a LLW than to attempt it myself. I mean half the cost and a LLW, is there any arguing with that?
'89 Raider 3.0L V6 (6G72) w/ AW372L (A44DL) A/T "The Millennium Falcon of automobiles"
|
|
|
|