I also want to add that even though my powertrax no-slip rear locker only has about 25k miles on it, it was in perfect condition.

This was great news because I've been experiencing a loud, I mean over the radio, grit you're teeth, shake the <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> end of the truck loud, popping noise coming from the rear of the truck and was afraid it was the no-slip. The noise and shaking of my truck usually happens on the 1-to-2 shift while going through a turn. I found that I have an axle shaft bearing on it's way out on the passenger side, that is letting the shaft have just a little too much play. Replacing that bearing as well as my leaking axle seal(at least they weren't on opposite sides <img src="/forums/images/graemlins/kewl.gif" alt="" />) is gonna happen sometime in the next few months. I've located a few complete axle shafts at a local junk yard for $75, so I'll probably go that route and swap the whole shebang out.

-chris


94 Rodeo, 35's, 5.38's, locked F&R, Rocker bar on one side, other side in garage

96 Tacoma, DD, pre-dented