Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Lockers and Engine Torque #292601 07/28/03 04:44 PM
Joined: Aug 2002
Posts: 23
brightray Offline OP
Need a Spot
I just installed lockers in both the front and the rear of my jeep. When driving I notice that the jeep kind of torques over when taking off and shifting gears. It goes the opposite way when in reverse. I was told this was normal but I just wanted to make sure.

Thanks,
Bryan Rennick


86 CJ7 258 (1st Jeep and loving it)
Dana 44 rear
35 MTRs with 5 inch lift
Powertrax lockers front and rear
Re: Lockers and Engine Torque [Re: brightray] #292602 07/28/03 05:30 PM
Anonymous
Unregistered
how much does it torq? Yes. a little bit is normal

Re: Lockers and Engine Torque #292603 07/28/03 06:06 PM
Joined: Aug 2002
Posts: 23
brightray Offline OP
Need a Spot
It actually feels like it raises the left side about 2 inches.


86 CJ7 258 (1st Jeep and loving it)
Dana 44 rear
35 MTRs with 5 inch lift
Powertrax lockers front and rear
Re: Lockers and Engine Torque [Re: brightray] #292604 07/30/03 02:37 AM
Anonymous
Unregistered
its fine mine does 2 and 1/4 without lockers

Re: Lockers and Engine Torque [Re: brightray] #292605 07/30/03 12:34 PM
Joined: Dec 1999
Posts: 2,791
KCjeeper Offline
Administrator
Sounds normal to me.....after a while you won't even notice.


Randy Halvorsen
98 Explorer XLT
99 F150 4x4
90 BMW 735i
00 BMW 323i
47 CJ-2A

Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5974 MB (Peak: 0.6589 MB) Data Comp: Off Server Time: 2026-06-13 13:31:46 UTC
Valid HTML 5 and Valid CSS