|
|
|
|
 Re: Discussion on balanced articulation
#296653
08/04/03 03:55 PM
|
Joined: Apr 2002
Posts: 394
OP
Mudrunner
|
Yea, I know the axle wrap problem with blocks. I used to wheel with a guy with 4" rear blocks and a marlin crawler. (Can you say kinked springs?? <img src="/forums/images/graemlins/shocked.gif" alt="" />) If I am going to use the blocks, I had planned on fabbing up a track bar on the axle housing.
|
|
|
Re: Discussion on balanced articulation
[Re: Lou Bell]
#296654
08/04/03 04:30 PM
|
Joined: Mar 2001
Posts: 2,731
Roll Me Over
|
That track bar would always be useful. With it, you could get away with blocks. But, for the added functionality in travel, I'd look into and spring shackle combo with some really long shocks.
Frank.
1994 4runner, 3.0, auto, 4.88's, 31's, BJ spacers, Coil spacers, air shocks, D-ring anchors, 4Crawler F/R swaybar discos. www.sdori.com
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.013s Queries: 16 (0.010s) Memory: 0.5935 MB (Peak: 0.6569 MB) Data Comp: Off Server Time: 2026-11-07 05:30:24 UTCValid HTML 5 and Valid CSS 
