Question for those who have Downey V6 3.0 headers

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Question for those who have Downey V6 3.0 headers #296809 08/05/03 04:30 AM

Joined: Dec 1999

Posts: 915

San Antonio, TX

Leo

Rock Warrior

I stripped the stud on my exhaust manifold (bottom part), the part where it bolts to the cat converter. Instead of replacing just the stud, which is a PITA, I'll just replace the whole manifold.

2000 - Tundra, V8 2WD Access Cab

Entire Thread
Subject	Posted By	Posted
Question for those who have Downey V6 3.0 headers	Leo	08/04/03 04:38 PM
Re: Question for those who have Downey V6 3.0 headers	ldivinag	08/05/03 02:17 AM
Re: Question for those who have Downey V6 3.0 headers	Leo	08/05/03 04:30 AM
Re: Question for those who have Downey V6 3.0 headers	Anonymous	08/05/03 03:18 AM
Re: Question for those who have Downey V6 3.0 headers	Leo	08/05/03 04:30 AM
Re: Question for those who have Downey V6 3.0 headers	Myredyota	08/05/03 04:22 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.926s Queries: 15 (3.923s) Memory: 0.6007 MB (Peak: 0.6337 MB) Data Comp: Off Server Time: 2026-11-04 00:14:24 UTC
Valid HTML 5 and Valid CSS